HX-PGS-ERP-SYS-SIU/06、業務管理系統/報價系統/合約係數新增.Designer.vb

<Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
Partial Class 合約係數新增
    Inherits System.Windows.Forms.Form

    'Form 覆寫 Dispose 以清除元件清單。
    <System.Diagnostics.DebuggerNonUserCode()> _
    Protected Overrides Sub Dispose(ByVal disposing As Boolean)
        Try
            If disposing AndAlso components IsNot Nothing Then
                components.Dispose()
            End If
        Finally
            MyBase.Dispose(disposing)
        End Try
    End Sub

    '為 Windows Form 設計工具的必要項
    Private components As System.ComponentModel.IContainer

    '注意: 以下為 Windows Form 設計工具所需的程序
    '可以使用 Windows Form 設計工具進行修改。
    '請勿使用程式碼編輯器進行修改。
    <System.Diagnostics.DebuggerStepThrough()> _
    Private Sub InitializeComponent()
        Me.主項目_tb = New System.Windows.Forms.TextBox()
        Me.Label1 = New System.Windows.Forms.Label()
        Me.係數1_nud = New System.Windows.Forms.NumericUpDown()
        Me.Label2 = New System.Windows.Forms.Label()
        Me.單位_cb = New System.Windows.Forms.ComboBox()
        Me.Label3 = New System.Windows.Forms.Label()
        Me.Label4 = New System.Windows.Forms.Label()
        Me.係數2_nud = New System.Windows.Forms.NumericUpDown()
        Me.Label5 = New System.Windows.Forms.Label()
        Me.係數3_nud = New System.Windows.Forms.NumericUpDown()
        Me.存檔_bt = New System.Windows.Forms.Button()
        CType(Me.係數1_nud, System.ComponentModel.ISupportInitialize).BeginInit()
        CType(Me.係數2_nud, System.ComponentModel.ISupportInitialize).BeginInit()
        CType(Me.係數3_nud, System.ComponentModel.ISupportInitialize).BeginInit()
        Me.SuspendLayout()
        '
        '主項目_tb
        '
        Me.主項目_tb.Location = New System.Drawing.Point(72, 2)
        Me.主項目_tb.Name = "主項目_tb"
        Me.主項目_tb.Size = New System.Drawing.Size(253, 23)
        Me.主項目_tb.TabIndex = 1817
        '
        'Label1
        '
        Me.Label1.AutoSize = True
        Me.Label1.Location = New System.Drawing.Point(3, 6)
        Me.Label1.Name = "Label1"
        Me.Label1.Size = New System.Drawing.Size(55, 16)
        Me.Label1.TabIndex = 1818
        Me.Label1.Text = "項目名稱"
        '
        '係數1_nud
        '
        Me.係數1_nud.DecimalPlaces = 2
        Me.係數1_nud.Location = New System.Drawing.Point(72, 27)
        Me.係數1_nud.Maximum = New Decimal(New Integer() {1410065408, 2, 0, 0})
        Me.係數1_nud.Minimum = New Decimal(New Integer() {100, 0, 0, 0})
        Me.係數1_nud.Name = "係數1_nud"
        Me.係數1_nud.Size = New System.Drawing.Size(89, 23)
        Me.係數1_nud.TabIndex = 1819
        Me.係數1_nud.ThousandsSeparator = True
        Me.係數1_nud.Value = New Decimal(New Integer() {100, 0, 0, 0})
        '
        'Label2
        '
        Me.Label2.AutoSize = True
        Me.Label2.Location = New System.Drawing.Point(3, 31)
        Me.Label2.Name = "Label2"
        Me.Label2.Size = New System.Drawing.Size(67, 16)
        Me.Label2.TabIndex = 1820
        Me.Label2.Text = "工廠用係數"
        '
        '單位_cb
        '
        Me.單位_cb.DropDownStyle = System.Windows.Forms.ComboBoxStyle.DropDownList
        Me.單位_cb.FormattingEnabled = True
        Me.單位_cb.Items.AddRange(New Object() {"%", "RP"})
        Me.單位_cb.Location = New System.Drawing.Point(236, 53)
        Me.單位_cb.Name = "單位_cb"
        Me.單位_cb.Size = New System.Drawing.Size(89, 24)
        Me.單位_cb.TabIndex = 1821
        '
        'Label3
        '
        Me.Label3.AutoSize = True
        Me.Label3.Location = New System.Drawing.Point(203, 57)
        Me.Label3.Name = "Label3"
        Me.Label3.Size = New System.Drawing.Size(31, 16)
        Me.Label3.TabIndex = 1822
        Me.Label3.Text = "單位"
        '
        'Label4
        '
        Me.Label4.AutoSize = True
        Me.Label4.Location = New System.Drawing.Point(167, 31)
        Me.Label4.Name = "Label4"
        Me.Label4.Size = New System.Drawing.Size(67, 16)
        Me.Label4.TabIndex = 1824
        Me.Label4.Text = "宿舍用係數"
        '
        '係數2_nud
        '
        Me.係數2_nud.DecimalPlaces = 2
        Me.係數2_nud.Location = New System.Drawing.Point(236, 27)
        Me.係數2_nud.Maximum = New Decimal(New Integer() {1410065408, 2, 0, 0})
        Me.係數2_nud.Minimum = New Decimal(New Integer() {100, 0, 0, 0})
        Me.係數2_nud.Name = "係數2_nud"
        Me.係數2_nud.Size = New System.Drawing.Size(89, 23)
        Me.係數2_nud.TabIndex = 1823
        Me.係數2_nud.ThousandsSeparator = True
        Me.係數2_nud.Value = New Decimal(New Integer() {100, 0, 0, 0})
        '
        'Label5
        '
        Me.Label5.AutoSize = True
        Me.Label5.Location = New System.Drawing.Point(3, 58)
        Me.Label5.Name = "Label5"
        Me.Label5.Size = New System.Drawing.Size(67, 16)
        Me.Label5.TabIndex = 1826
        Me.Label5.Text = "辦公樓係數"
        '
        '係數3_nud
        '
        Me.係數3_nud.DecimalPlaces = 2
        Me.係數3_nud.Location = New System.Drawing.Point(72, 54)
        Me.係數3_nud.Maximum = New Decimal(New Integer() {1410065408, 2, 0, 0})
        Me.係數3_nud.Minimum = New Decimal(New Integer() {100, 0, 0, 0})
        Me.係數3_nud.Name = "係數3_nud"
        Me.係數3_nud.Size = New System.Drawing.Size(89, 23)
        Me.係數3_nud.TabIndex = 1825
        Me.係數3_nud.ThousandsSeparator = True
        Me.係數3_nud.Value = New Decimal(New Integer() {100, 0, 0, 0})
        '
        '存檔_bt
        '
        Me.存檔_bt.BackgroundImage = Global.HX_PGS_ERP_SYS.My.Resources.Resources.SAVER
        Me.存檔_bt.BackgroundImageLayout = System.Windows.Forms.ImageLayout.Zoom
        Me.存檔_bt.Font = New System.Drawing.Font("微軟正黑體", 9.0!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(136, Byte))
        Me.存檔_bt.ForeColor = System.Drawing.Color.Purple
        Me.存檔_bt.Location = New System.Drawing.Point(331, 2)
        Me.存檔_bt.Name = "存檔_bt"
        Me.存檔_bt.Size = New System.Drawing.Size(75, 75)
        Me.存檔_bt.TabIndex = 1827
        Me.存檔_bt.UseVisualStyleBackColor = True
        '
        '合約係數新增
        '
        Me.AutoScaleDimensions = New System.Drawing.SizeF(7.0!, 16.0!)
        Me.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font
        Me.ClientSize = New System.Drawing.Size(409, 82)
        Me.Controls.Add(Me.存檔_bt)
        Me.Controls.Add(Me.Label5)
        Me.Controls.Add(Me.係數3_nud)
        Me.Controls.Add(Me.Label4)
        Me.Controls.Add(Me.係數2_nud)
        Me.Controls.Add(Me.Label3)
        Me.Controls.Add(Me.單位_cb)
        Me.Controls.Add(Me.Label2)
        Me.Controls.Add(Me.係數1_nud)
        Me.Controls.Add(Me.Label1)
        Me.Controls.Add(Me.主項目_tb)
        Me.Font = New System.Drawing.Font("微軟正黑體", 9.0!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(136, Byte))
        Me.Margin = New System.Windows.Forms.Padding(4, 4, 4, 4)
        Me.MaximizeBox = False
        Me.MinimizeBox = False
        Me.Name = "合約係數新增"
        Me.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen
        Me.Text = "請依序輸入下方新增資料"
        CType(Me.係數1_nud, System.ComponentModel.ISupportInitialize).EndInit()
        CType(Me.係數2_nud, System.ComponentModel.ISupportInitialize).EndInit()
        CType(Me.係數3_nud, System.ComponentModel.ISupportInitialize).EndInit()
        Me.ResumeLayout(False)
        Me.PerformLayout()

    End Sub

    Friend WithEvents 主項目_tb As TextBox
    Friend WithEvents Label1 As Label
    Friend WithEvents 係數1_nud As NumericUpDown
    Friend WithEvents Label2 As Label
    Friend WithEvents 單位_cb As ComboBox
    Friend WithEvents Label3 As Label
    Friend WithEvents Label4 As Label
    Friend WithEvents 係數2_nud As NumericUpDown
    Friend WithEvents Label5 As Label
    Friend WithEvents 係數3_nud As NumericUpDown
    Friend WithEvents 存檔_bt As Button
End Class